home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HPAVC
/
HPAVC CD-ROM.iso
/
CELLP.ZIP
/
CMTELCO1.TXT
< prev
next >
Wrap
Text File
|
1993-04-16
|
3KB
|
60 lines
CM TELECOM AR3800
NOTES: This is a dual NAM unit.
The ESN prefix is 153 decimal and 99 hex.
This unit was only imported for a short time and is no longer
supported in the USA.
Several different software versions have been available and not
every phone will follow these steps... Good Luck!
Leave NAM 2 data at factory default If NAM 2 is not used.
1. Turn on power.
2. Lock phone by pressing FUNC 1, then 1 repeatedly until the phone
displays F-LOCK, press SND.
3. Enter * 5 9 6 5, display will show "CONF 3800", if not try entering
* 4 0 1 8 which is the master reset code.
4. Volume up and down keys step through the programing data. You may
also directly access any step by pressing RCL NN, where NN is the
step number. Some single digit options toggle by pressing STO (?).
5. Press SND to store each step.
6. Press END to complete programing and exit at any time.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 10 DIGITS MINA NAM 1 AREA CODE & PHONE NUMBER
02 00000 - 99999 SIDA NAM 1 SYSTEM ID
03 0333 OR 0334 IPCHA NAM 1 INITIAL PAGING CHANNEL
04 2 DIGITS ACOLCA NAM 1 ACCESS OVERLOAD CLASS
05 2 DIGITS GIMA NAM 1 GROUP ID (10 IN USA)
06 0 OR 1 L CTLA NAM 1 LOCAL USE MARK
07 0 - 4 MINA NAM 1 PREFERRED SYSTEM
0 = Prefer A
1 = Prefer B
2 = A only
3 = B only
4 = Home only
08 UNKNOWN (LOCK CODE?)
09 UNKNOWN
10 10 DIGITS MINB NAM 2 AREA CODE & PHONE NUMBER
11 00000 - 99999 SIDAB NAM 2 SYSTEM ID
12 0333 OR 0334 IPCHB NAM 2 INITIAL PAGING CHANNEL
13 2 DIGITS AOLCB NAM 2 ACCESS OVERLOAD CLASS
14 2 DIGITS GIMB NAM 2 GROUP ID (10 IN USA)
15 0 OR 1 L CTLB NAM 2 LOCAL USE MARK
16 0 - 4 MINB NAM 2 PREFERRED SYSTEM
0 = Prefer A
1 = Prefer B
2 = A only
3 = B only
4 = Home only
17 0 ONLY E ADDR LEAVE AT 0
18 0 OR 1 PWR SAVE AUTO POWER OFF OPTION
19 00000 - 99999 ISID INHIBIT SYSTEM ID
20 4 DIGITS PCAC PROGRAMING PASSWORD